XDK API  3.6.0
Documentation
Macros
BLE board pins

Settings used for the BLE sensor contained in the board. More...

+ Collaboration diagram for BLE board pins:

Macros

#define BT_IRQ_MODE   (gpioModeDisabled)
 
#define BT_IRQ_PIN   (11)
 
#define BT_IRQ_PORT   (gpioPortD)
 
#define BT_RESET_PROCESSING_DELAY_MS   UINT32_C(5)
 
#define BT_RESET_PULLUP_DELAY_MS   UINT32_C(2)
 
#define BT_RST_MODE   (gpioModeWiredOr)
 
#define BT_RST_PIN   (9)
 
#define BT_RST_PORT   (gpioPortA)
 
#define BT_SERIAL_PORT   UART0
 
#define BT_STARTUP_DELAY_MS   UINT32_C(4)
 
#define BT_TRANSMIT_DISABLE_TIMEOUT_MS   UINT32_C(2)
 
#define BT_UART0_CLOCK   (cmuClock_UART0)
 
#define BT_UART0_RX_DMA_CHANNEL   (3)
 
#define BT_UART0_RX_MODE   (gpioModeInput)
 
#define BT_UART0_RX_PIN   (1)
 
#define BT_UART0_RX_PORT   (gpioPortE)
 
#define BT_UART0_TX_DMA_CHANNEL   (2)
 
#define BT_UART0_TX_MODE   (gpioModePushPull)
 
#define BT_UART0_TX_PIN   (0)
 
#define BT_UART0_TX_PORT   (gpioPortE)
 
#define BT_UART_RX_IRQn   UART0_RX_IRQn
 
#define BT_UART_RX_PRIORITY   UINT32_C(5)
 
#define BT_UART_TX_IRQn   UART0_TX_IRQn
 
#define BT_UART_TX_PRIORITY   UINT32_C(5)
 
#define BT_WAKEUP_DELAY_MS   UINT32_C(250)
 
#define BT_WAKEUP_MODE   (gpioModeWiredOr)
 
#define BT_WAKEUP_PIN   (10)
 
#define BT_WAKEUP_PORT   (gpioPortD)
 

Detailed Description

Warning
Please do not change these settings, since these are specific to hardware

Macro Definition Documentation

#define BT_IRQ_MODE   (gpioModeDisabled)
#define BT_IRQ_PIN   (11)
#define BT_IRQ_PORT   (gpioPortD)
#define BT_RESET_PROCESSING_DELAY_MS   UINT32_C(5)
#define BT_RESET_PULLUP_DELAY_MS   UINT32_C(2)
#define BT_RST_MODE   (gpioModeWiredOr)
#define BT_RST_PIN   (9)
#define BT_RST_PORT   (gpioPortA)
#define BT_SERIAL_PORT   UART0
#define BT_STARTUP_DELAY_MS   UINT32_C(4)
#define BT_TRANSMIT_DISABLE_TIMEOUT_MS   UINT32_C(2)
#define BT_UART0_CLOCK   (cmuClock_UART0)
#define BT_UART0_RX_DMA_CHANNEL   (3)
#define BT_UART0_RX_MODE   (gpioModeInput)
#define BT_UART0_RX_PIN   (1)
#define BT_UART0_RX_PORT   (gpioPortE)
#define BT_UART0_TX_DMA_CHANNEL   (2)
#define BT_UART0_TX_MODE   (gpioModePushPull)
#define BT_UART0_TX_PIN   (0)
#define BT_UART0_TX_PORT   (gpioPortE)
#define BT_UART_RX_IRQn   UART0_RX_IRQn
#define BT_UART_RX_PRIORITY   UINT32_C(5)
#define BT_UART_TX_IRQn   UART0_TX_IRQn
#define BT_UART_TX_PRIORITY   UINT32_C(5)
#define BT_WAKEUP_DELAY_MS   UINT32_C(250)
#define BT_WAKEUP_MODE   (gpioModeWiredOr)
#define BT_WAKEUP_PIN   (10)
#define BT_WAKEUP_PORT   (gpioPortD)

All rights reserved. The use is subject to the XDK SDK EULA by Bosch Connected Devices and Solutions GmbH.
This documentation file has been automatically generated on Thu Mar 14 2019 19:12:51 by doxygen 1.8.8