XDK API  3.6.0
Documentation
Macros | Functions
AppController.h File Reference

Configuration header for the AppController.c file. More...

#include "BCDS_Basics.h"
+ Include dependency graph for AppController.h:
+ This graph shows which files directly or indirectly include this file:

Macros

#define EXTENSION_PORT_GPIO_FEATURE   1
 
#define EXTENSION_PORT_I2C_FEATURE   1
 
#define EXTENSION_PORT_SPI_FEATURE   1
 
#define EXTENSION_PORT_UART_FEATURE   1
 

Functions

void AppController_Init (void *cmdProcessorHandle, uint32_t param2)
 Gives control to the Application controller. More...
 

Macro Definition Documentation

#define EXTENSION_PORT_GPIO_FEATURE   1

EXTENSION_PORT_GPIO_FEATURE is the GPIO feature control macro for extension port. If enabled (set as 1) then

  • The PA0 GPIO pin is programmed for generating interrupt on both raising edge and falling edge.
  • The PA1 GPIO Pin is configured as output and toggled the of the pin for a couple of times If disabled (set as 0) then this feature will not be built into the software.
#define EXTENSION_PORT_I2C_FEATURE   1

EXTENSION_PORT_I2C_FEATURE is the I2C feature control macro for extension port. If enabled (set as 1) then basic read and write to the interfaced device registers is performed. If disabled (set as 0) then this feature will not be built into the software.

#define EXTENSION_PORT_SPI_FEATURE   1

EXTENSION_PORT_SPI_FEATURE is the SPI feature control macro for extension port. If enabled (set as 1) then basic read and write to the interfaced device registers is performed. If disabled (set as 0) then this feature will not be built into the software.

#define EXTENSION_PORT_UART_FEATURE   1

EXTENSION_PORT_UART_FEATURE is the UART feature control macro for extension port. If enabled (set as 1) then whatever data received in RX of UART is echoed (transmitted) back to the TX of UART. If disabled (set as 0) then this feature will not be built into the software.


All rights reserved. The use is subject to the XDK SDK EULA by Bosch Connected Devices and Solutions GmbH.
This documentation file has been automatically generated on Thu Mar 14 2019 19:12:39 by doxygen 1.8.8