XDK API  3.6.0
Documentation
Macros | Functions
BSP_LoRa_RN2xx3.c File Reference

Implementation of LoRa/HSPA cellular BSP functions. More...

#include "BCDS_BSP.h"
#include "BCDS_HAL.h"
#include "BSP_BoardType.h"
#include "BSP_BoardExtSettings.h"
#include "BSP_BoardShared.h"
#include "BSP_LoRa_RN2xx3.h"
#include "BCDS_BSP_LoRa_RN2xx3.h"
#include "BCDS_MCU_UART_Handle.h"
#include "BSP_ExtensionPort.h"
#include "em_usart.h"
+ Include dependency graph for BSP_LoRa_RN2xx3.c:

Macros

#define BCDS_MODULE_ID   BCDS_BSP_MODULE_ID_LORA_RN2XX3
 

Functions

static void BreakAndSync (uint32_t baudrate)
 
Retcode_T BSP_LoRa_RN2xx3_ChangeBaudrate (uint32_t baudrate)
 Changes the baudrate of the communication interface. More...
 
Retcode_T BSP_LoRa_RN2xx3_Connect (void)
 Maps the GPIO pins to their desired function. More...
 
Retcode_T BSP_LoRa_RN2xx3_Disable (void)
 Disables the control over the peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_Disconnect (void)
 Disconnects the LPWAN (LoRa) peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_Enable (void)
 Enables the control over the peripheral. More...
 
HWHandle_T BSP_LoRa_RN2xx3_GetUartHandle (void)
 Returns the UART handle of the communication interface used by the peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_SetResetPin (uint32_t state)
 Sets the reset pin of the module to the desired state Low or High. More...
 
Retcode_T BSP_LoRa_RN2xx3_WakeUp (void)
 Sends wake-up signal to the LoRa module. More...
 

Macro Definition Documentation

#define BCDS_MODULE_ID   BCDS_BSP_MODULE_ID_LORA_RN2XX3

Function Documentation

static void BreakAndSync ( uint32_t  baudrate)
static

+ Here is the caller graph for this function:


All rights reserved. The use is subject to the XDK SDK EULA by Bosch Connected Devices and Solutions GmbH.
This documentation file has been automatically generated on Thu Mar 14 2019 19:12:48 by doxygen 1.8.8