XDK API  3.6.0
Documentation
Macros
BSP_BoardExtSettings.h File Reference
#include "BSP_BoardSettings.h"
#include "BCDS_HAL.h"
+ Include dependency graph for BSP_BoardExtSettings.h:
+ This graph shows which files directly or indirectly include this file:

Macros

#define CHARGING_N_MODE   (gpioModeInput)
 
#define CHARGING_N_PIN   (8)
 
#define CHARGING_N_PORT   (gpioPortC)
 
#define EXT_CHARGE_CRITICAL_LOWER_LIMIT   3300
 
#define EXT_CHARGE_CRITICAL_UPPER_LIMIT   3500
 
#define EXT_CHARGE_HIGH_LOWER_LIMIT   3925
 
#define EXT_CHARGE_HIGH_UPPER_LIMIT   4300
 
#define EXT_CHARGE_LOW_LOWER_LIMIT   3500
 
#define EXT_CHARGE_LOW_UPPER_LIMIT   3650
 
#define EXT_CHARGE_NO_BATTERY_HIGH_LIMIT   600
 
#define EXT_CHARGE_NORMAL_LOWER_LIMIT   3650
 
#define EXT_CHARGE_NORMAL_UPPER_LIMIT   3925
 
#define EXT_CHARGE_ON_LOWER_LIMIT   4300
 
#define EXT_CHARGE_ON_UPPER_LIMIT   4520
 
#define EXT_CHARGE_VREG_NO_BATTERY   3680
 
#define EXTENSION_BUS_TEMP_PIN_GPIO_IN_A   (8)
 
#define EXTENSION_BUS_TEMP_PIN_GPIO_IN_B   (9)
 
#define EXTENSION_BUS_TEMP_PIN_GPIO_OUT_A   (1)
 
#define EXTENSION_BUS_TEMP_PIN_GPIO_OUT_B   (2)
 
#define EXTENSION_BUS_TEMP_PORT_GPIO_IN_A   (gpioPortC)
 
#define EXTENSION_BUS_TEMP_PORT_GPIO_IN_B   (gpioPortC)
 
#define EXTENSION_BUS_TEMP_PORT_GPIO_OUT_A   (gpioPortA)
 
#define EXTENSION_BUS_TEMP_PORT_GPIO_OUT_B   (gpioPortE)
 
#define PGOOD_N_MODE   (gpioModeInputPull)
 
#define PGOOD_N_PIN   (8)
 
#define PGOOD_N_PORT   (gpioPortC)
 
#define PTD_DOUT_EXTENSION_I2C1_SCL   (1)
 
#define PTD_DOUT_EXTENSION_I2C1_SDA   (1)
 
#define PTD_MODE_EXTENSION_I2C1_SCL   (gpioModeWiredAnd)
 
#define PTD_MODE_EXTENSION_I2C1_SDA   (gpioModeWiredAnd)
 
#define PTD_PIN_EXTENSION_I2C1_SCL   (12)
 
#define PTD_PIN_EXTENSION_I2C1_SDA   (11)
 
#define PTD_PORT_EXTENSION_I2C1_SCL   (gpioPortB)
 
#define PTD_PORT_EXTENSION_I2C1_SDA   (gpioPortB)
 
#define UART1_BAUDRATE   115200
 
#define UART1_DATABITS   usartDatabits8
 
#define UART1_MAJORITY_VOTING   false
 
#define UART1_OVERSAMPLING   usartOVS16
 
#define UART1_PARITY   usartNoParity
 
#define UART1_PRS_RX_CHANNEL   usartPrsRxCh0
 
#define UART1_PRS_RX_ENABLE   false
 
#define UART1_REF_FREQ   0
 
#define UART1_STATE   usartDisable
 
#define UART1_STOPBITS   usartStopbits1
 
#define VBAT_SENSE_MODE   (gpioModeDisabled)
 
#define VBAT_SENSE_PIN   (5)
 
#define VBAT_SENSE_PORT   (gpioPortD)
 

All rights reserved. The use is subject to the XDK SDK EULA by Bosch Connected Devices and Solutions GmbH.
This documentation file has been automatically generated on Thu Mar 14 2019 19:12:48 by doxygen 1.8.8