XDK API  3.6.0
Documentation
Functions
BCDS_BSP_Max31865.h File Reference
#include "BCDS_HAL.h"
+ Include dependency graph for BCDS_BSP_Max31865.h:
+ This graph shows which files directly or indirectly include this file:

Functions

Retcode_T BSP_Max31865_Connect (void)
 Maps the GPIO pins to their desired function. More...
 
Retcode_T BSP_Max31865_Disable (void)
 Disables the control over the peripheral. More...
 
Retcode_T BSP_Max31865_Disconnect (void)
 Disconnects the Temperature peripheral. More...
 
Retcode_T BSP_Max31865_Enable (void)
 Enables the control over the peripheral. More...
 
HWHandle_T BSP_Max31865_GetSPIHandle (void)
 Returns the handle of the communication interfaces used by the peripheral. More...
 
Retcode_T BSP_Max31865_GetStatus (uint8_t *isConnected)
 Get the Status of the peripheral(Temp Sensor). More...
 
Retcode_T BSP_Max31865_SetCSHigh (void)
 Sets the Max31865 chip select pin to logic level high. More...
 
Retcode_T BSP_Max31865_SetCSLow (void)
 Sets the Max31865 chip select pin to logic level low. More...
 

Function Documentation

Retcode_T BSP_Max31865_Connect ( void  )

This function once called will map the GPIO pins to their desired functions to drive the Temperature Sensor peripheral. It is needed to call this function prior to the BSP_Max31865_Enable().

Return values
RETCODE_OKin the case of success or an error code otherwise.

+ Here is the call graph for this function:

Retcode_T BSP_Max31865_Disable ( void  )
Return values
RETCODE_OKin the case of success or an error code otherwise.

+ Here is the call graph for this function:

Retcode_T BSP_Max31865_Disconnect ( void  )

This function disconnects the GPIO pins dedicated to the Temperature Sensor peripheral and put them into low power consumption state.

Return values
RETCODE_OKin the case of success or an error code otherwise.

+ Here is the call graph for this function:

Retcode_T BSP_Max31865_Enable ( void  )
Return values
RETCODE_OKin the case of success or an error code otherwise.

+ Here is the call graph for this function:

HWHandle_T BSP_Max31865_GetSPIHandle ( void  )
Returns
HWHandle_T
Retcode_T BSP_Max31865_GetStatus ( uint8_t *  isConnected)
Parameters
in/out]isConnected: To get the Max31865 Sensor connected status, if the sensor connected it's true otherwise false.
Returns
RETCODE_OK in the case of success or an error code otherwise.
Retcode_T BSP_Max31865_SetCSHigh ( void  )
Return values
RETCODE_OKin the case of success or an error code otherwise.

+ Here is the caller graph for this function:

Retcode_T BSP_Max31865_SetCSLow ( void  )
Return values
RETCODE_OKin the case of success or an error code otherwise.

All rights reserved. The use is subject to the XDK SDK EULA by Bosch Connected Devices and Solutions GmbH.
This documentation file has been automatically generated on Thu Mar 14 2019 19:12:48 by doxygen 1.8.8